Difference Between Similar Terms and Objects

Differences between the Remington 700 and 783

Remington_Model_700

For the hunters and the firearms enthusiasts among us, and more specifically the Remington loyalist, this article is for you. However, even if you are just starting to get acquainted with rifles, you will learn a few things here as well. The Remington Model 700 has been manufactured since 1962, and is a series of centerfire bolt-action rifles. The Model 700 was a development of the Remington 721 and 722 which were introduced in 1948.i

To be clear, the Remington Model 783 has a reason for the numbers. The “7” is for the model designation as being in the 700 line of rifles. The “8” is to reflect back to the Model 788 which was discontinued over 20 years ago. The “3” is for the year 2013ii. So now you know the reason for the number “783”.

No Good Reason to Compare 

The Remington Model 700 has been the standard for the Remington brand for more than five decades and still going strong. The Model 783 was not introduced in 2013 to compete or even replace the Model 700. Rather, it was engineered and placed in the market to compete against competitors such as the “Savage Axis”, the “Tikka T3” and the “Ruger American Rifle”. These guns have shown that sacrificing accuracy is not a matter of price. The question of “can I have an inexpensive rifle and still have accuracy” came into play. The answer was a resounding “yes”. Remington also wanted to keep features that are important to hunters. A superb trigger, pillar-embedded stock and free-floating barrel inclusive of a target crown, to name a few! However, since this article is about comparing the Model 700 with the Model 783 we will do our best. It will mostly be a descriptive review of the Model 783, with the assumption that the readers are already familiar with the Model 700 due to its popularity and long history.

Loading

The Model 700, by its design was a top loading gun.  This means that there is no metal going over the top or the bolt. However, the 783 is magazine fed. This creates a smaller ejection port, creating a frame that is more rigid. It would be assumed that the machining time from this design would be reduced as a result. The detachable box magazine is metal, not plastic. It is easy to load, not having to be concerned about the plastic box inability to sometimes not load properly. Just place on bottom of rifle and give it a snap.

Accuracy

The Model 783 did not sacrifice accuracy for price. It has a one-piece cylindrical receiver and small injection port. The accuracy is improved due to more mass and rigidity passing through the receiver. In addition, the trigger and the barrel are considerations for accuracy. The barrel is magnum contoured, 22-inchor 24-inch button-rifled fitted with a barrel nut. The trigger is user adjustable, but is factory set at 3.5 pounds. This feature alone makes the Model 783 become a much more personal rifle to the user. The experienced non-Remington field-testers that were the first to test the rifle for accuracy all came down to the Model 783 being a very well manufactured rifle, with extreme accuracy that was in the inexpensive price range. A big win against the competition!

Durability and Features

The question of durability will come into play here. The reason is that Remington makes it clear is that it is a factory made rifle that is inexpensive. It is of course mass produced. However, it appears to be able to take the beatings and constant use that most hunters place on their rifles. As far as the features, they are best summed up here by Bob Shelliii

  • New Crossfire trigger system, factory set at 3.5 pounds, user adjustable from 2.5 to 5 pounds
  • Carbon steel magnum contour button riffled barrel
  • 22” standard chambering and 24” on magnums
  • Pillar-bedded stock and free-floated barrel
  • SuperCell Recoil Pad
  • Model 783 accepts two Model 700 front bases
  • Available in 270, 308, 30-06d and 7 mm Rem Mag.
  • MSRP starts at $439.00

It was a little difficult to compare the Model 700 to the Model 783 simply because one was not meant to replace the other. It was to answer to the charge of competition of producing a rugged, inexpensive and accurate rifle. The Model 783 was also manufacture for durability, ruggedness and to produce in the hunter the knowledge that this rifle was made just for them personally. We trust you enjoyed this brief description and comparison. Now go out, and enjoy the hunt.

Sharing is caring!


Search DifferenceBetween.net :




Email This Post Email This Post : If you like this article or our site. Please spread the word. Share it with your friends/family.


5 Comments

  1. Someone gave me a remington 78 in 06. However, itnis.missing the bolt. Will a remington 700 LA bolt work?

    Yeah yeah, I know to have it headspaced

    • As I replied to Berry, short answer:
      No, I don’t believe the actions and bolts are cross-compatible.

      TLDR:
      I believe the 783 borrowed the idea of the floating bolt head from Savage to help increase accuracy from gun to gun. The 700 had the famous (infamous) “Three Rings of Steel” or “Safety”…whichever…where the rigid bolt slides into a rigid receiver creating a nearly solid tube of seamless steel, and one of the safer actions on the market, but one that is also horribly inaccurate if anything is slightly off (most people building a custom rifle off of a 700 action have it trued/lapped before they do anything else.

      The actions are completely different. Because of the floating bolt face, which automatically lines up with the chamber, the 783 doesn’t need to be trued before it is accurate. It’s the same reason Savage has a reputation for out-of-the-box MOA or better accuracy (even with some sketchy barrels sometimes). Therefore, no, I am fairly sure the 700 bolts won’t work in the 783.

  2. Will a modle 700 bolt work on a 783

  3. Which one best 783 or 700.

Leave a Response

Please note: comment moderation is enabled and may delay your comment. There is no need to resubmit your comment.

References :


[0]https://commons.wikimedia.org/wiki/File:Remington_Model_700.jpg

Articles on DifferenceBetween.net are general information, and are not intended to substitute for professional advice. The information is "AS IS", "WITH ALL FAULTS". User assumes all risk of use, damage, or injury. You agree that we have no liability for any damages.


See more about : ,
Protected by Copyscape Plagiarism Finder